Municipal Waste Incineration Scrubber
As municipal waste incineration standards become stricter, businesses face the challenge of keeping an incinerator operating without paying a high price for regulatory compliance. The Envitech Wet Scrubbing System is the affordable solution for meeting new, stricter regulations. The following components are utilized in municipal waste incinerator gas cleaning systems.
The Quencher provides turbulence to saturate the gas while collecting large particulate matter and absorbing acid gases. This efficient gas-conditioning step reduces the demand on the downstream components by ensuring a steady gas flow through the system.
The Condenser/Absorber sub-cools and scrubs the acids from the gas. Water vapor in the gas stream is removed by condensation, lowering the energy requirements. Heavy metals -- mercury, lead and cadmium -- are condensed and collected. In addition, the Condenser/Absorber causes the fine particles and heavy metals to condense and grow in mass, resulting in enhanced removal efficiency.
- VENTURI SCRUBBER
Envitech's Venturi Scrubber uses fine drop atomization to create large surface areas for efficient collection of particulate matter and acid gases. No spray nozzles are used. This allows re-circulation of the scrubbing liquid without the typical problem of plugged nozzles or piping.
- ENTRAINMENT SEPARATOR
Envitech's high-efficiency, multi-stage waveform Entrainment Separator effectively collects fine droplets from the gas stream while operating at a low-pressure drop. The removal of water droplets from the gas stream is extremely important because the presence of any entrained liquid degrades system performance.